General Spectrometer Accessories
Glass Expansion Quartz Torch Long-life with 90deg bend and 2.3mm Injector for 700-ES or Vista Axial
Quartz Torch, single-piece, with 90 Deg. bend and 2.3 mm ID injector, for Agilent (Varian) 700-ES or Vista Axial Series ICP-OES. Recommended for routine aqueous analysis but not inert to samples containing hydrofluoric acid (HF).Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Glass Expansion D-Torch for Agilent 5100/5110 RV
D-Torch with quartz outer tube & installation guide, requires choice of injector. Compatible with Agilent 5100/5110 RV.A patented, precision-engineered, demountable torch, incorporating a ceramic intermediate tube for greater robustness & demountable outer tube that can be replaced when it fails rather than replacing the entire torch. D-Torch also features an interchangeable injector, allowing installation of a specific injector, whether it be for aqueous (~2.0mm ID), organics (<2.0mm ID), high TDS (>2.0mm ID) or HF (alumina).The D-Torch is the only design with an optional, demountable ceramic outer tube (P/N 501907236). The quartz outer tube is ideal for most applications while the ceramic outer tube is best for high TDS, organics, or HF matrices. Replacement parts include 31-808-3568, 501907234, 31-808-2962, 31-808-3566, 31-808-3578, 70-803-1500Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Glass Expansion Tapered Quartz Injector 1.0mm
Quartz Tapered Injector with 1.0mm ID. 1.0mm ID tapered quartz injector. This quartz injector is for use with PerkinElmer Optima 4300V/5300V/7300V Series ICP-OES instruments. They are designed for organic solvents and non-HF matrices. A variety of sizes are available as an alternative to the standard injector.PerkinElmer Optima 4300V/5300V/7300V ICP-OES Series Injectors - Compatible with 50-190-7156 (31-808-2821), 50-190-6981 (30-807-0064), 50-190-7033 (30-808-3593), 50-190-7020 (30-808-2832), 50-210-4733 (N0771561), 50-904-3809 (N0771500). Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Glass Expansion D-Torch for SpectroBlue EOP
D-Torch with quartz outer tube & installation guide, requires choice of injector. Compatible with Spectro Blue EOP ICP-OES.A patented, precision-engineered, demountable torch, with a replaceable quartz outer tube. Since the quartz outer tube is usually the first to wear and can be replaced, the D-Torch provides a much lower operating cost than other demountable torches. It also incorporates a more robust ceramic inner tube and has the same mounting system as the standard fixed torch. Additionally, the D-Torch features interchangeable injectors, allowing flexibility in the installation of method specific injectors, whether it be for aqueous (~2.0mm ID), organics (<2.0mm ID), high TDS (>2.0mm ID) HF (alumina) or high purity (sapphire). Replacement parts include 31-808-3605, 501907239, 31-808-2962, 31-808-3595, 31-808-3651, 21-809-4045Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Glass Expansion Quartz Torch with 2.0mm Injector for Agilent 7700/7800/7900/8800/8900
Quartz Torch, single-piece, 2.0 mm id injector, for routine aqueous analysis with Agilent 7700, 7800, 7850, 7900, 8800, 8900 ICP-MS. Suitable for routine aqueous applications but not inert to samples containing hydrofluoric acid (HF).For volatile organic solvents, see catalog number 50-190-6995 or 50-190-6994.For samples containing HF see catalog number 30-808-4185.Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Glass Expansion Tracey TFE Spray Chamber with Helix CT, 50ml cyclonic, PTFE. Includes UFT-2-700 UniFit Connector (1 unit) and 70-803-1439 Helix CT locking screw with seal (1 unit)
Tracey PTFE spray chamber, includes Helix CT locking screw & seal (1 pc) & UniFit with 2.0mm OD x 0.86mm ID x 700mm long tube (1 pc). Made from PTFE for HF resistance, 50mL volume. Compatible with Agilent 700-ES Series Axial, Vista Axial ICP-OES.The Tracey PTFE is a HF-resistant cyclonic design with a proprietary Stediflow surface treatment that significantly improves sensitivity & precision, in addition to enhancing washout efficiency compared to other inert spray chamber designs. The interior surface can be refurbished at a nominal cost, average lifespan of treatment is 12 months when well cared for.The main feature of the Helix CT interface is the built-in, ratcheting torque control mechanism that allows for a consistent, zero dead volume & chemically inert seal of the nebulizer.Replacement parts include UFT-2-700, NC2081825 & V-044, suggested to replace every 6 months.Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Glass Expansion IsoMist XR Kit for Shimadzu ICPE 9800.
IsoMist XR Kit for Shimadzu ICPE 9800. Compatible with Shimadzu ICPE 9800 ICP-OES. This IsoMist XR is programmable and temperature-controlled, with a glass cyclonic spray chamber now featuring an improved thermodynamic design that provides an extended temperature range of -25°C to +80°C. The temperature is settable in 1°C increments and can maintain accuracy of + or – 0.1°C. Proven performance results are, improved long-term stability and precision, no dilution for volatile organic solvents, reduced oxide interferences (ICP-MS), enhanced sensitivity and accuracy, lower detection limits, faster washout, and reduced hazardous waste/disposal fees.Replacement parts include 21-809-3270, 21-809-3998, and 501907304.The IsoMist XR comes standard with a borosilicate glass spray chamber. Optional quartz or PFA HF-resistant spray chambers can be ordered separately.Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Glass Expansion Contour Flared End Solva Flex Pump Tube 2tag, 140mm spacing, 1.42mm ID, Yellow/Yellow (PKT 6)
Contour Flared End Solva Flex Pump Tube 2tag, 140mm spacing, 1.42mm ID Yellow/Yellow (PKT 6).Tag Colors: Yellow/YellowID mm: 1.42Wall Thickness mm: 0.86OD mm: 3.14Overall Length: 455mm (140mm spacing between tags)Number of Tubes Per Pack: 6Physical Properties: Thermoplastic, PVC based material with plasticizerMaterial: Made from Tygon 4040 or equivalent.Special Properties: Special tubing for hydrocarbons, petroleum products and distillates.Chemical Compatibility: Ideal for gasoline, kerosene, heating oils, cutting liquids and coolants based on glycols.Limitations: Not recommended for strong acids and alkalis, foodstuffs, beverages and medicines. Potential leaching of plasticizersGlass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Glass Expansion Tapered Quartz Injector 2.5mm for D-Torch
Tapered Quartz Injector with 2.5mm ID.2.5mm ID Tapered Quartz Injector. They are designed for organic solvents and non-HF matrices. Compatible with Spectro (Ametek) SOP Modula, CIROS, Genesis, ARCOS Radial D-Torch 50-190-7023 (30-808-2928). When replacing your injector, it is recommended to replace the injector ferrule (31-808-2962), on average every 6 months.Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Glass Expansion Elegra Argon Humidifier
Elegra Argon Humidifier. Compatible with PerkinElmer Elan/NexION 300 Series ICP-MS. An argon humidifier is commonly used in ICP analyses involving samples with high concentrations of dissolved solids. It helps to alleviate salt deposits in the nebulizer & torch injector, allowing uninterrupted & maintenance-free operation. Compact, durable, cost-effective design with a non-pressurized water reservoir, & no heating or electric power required. An easy-to-use bypass switch allows you to take the Elegra off-line without disconnecting argon lines. Highly efficient membrane humidification technology that consistently maintains signal stability for samples with high TDS. Inert & metal-free eliminates possibility of contamination. Simple to use & maintain with maximum & minimum fill lines ensuring you are always operating under optimum conditions.Replacement Elegra Membrane, P/N 70-803-1286. Opt. Mount 708031581.Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-900
Glass Expansion Elegra Dual Channel Argon Humidifier
Elegra Dual Channel Argon Humidifier. Compatible with Agilent 4500/7500 Series ICP-MS. This dual channel argon humidifier allows the nebulizer and auxiliary/make-up gas to be humidified. An argon humidifier is commonly used in ICP analyses involving samples with high concentrations of dissolved solids. It helps to alleviate salt deposits in the nebulizer & torch injector, allowing uninterrupted & maintenance-free operation. Compact, durable, cost-effective design with a non-pressurized water reservoir, & no heating or electric power required. Highly efficient membrane humidification technology that consistently maintains signal stability for samples with high TDS. Inert & metal-free eliminates possibility of contamination. Simple to use & maintain ensuring optimum operating conditions.Replacement Elegra Membrane, P/N 70-803-1286.Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-900
Glass Expansion Quartz Torch with 2.5mm Injector for Agilent 7500, 2 Projections, HMI Compatible
Quartz Torch, single-piece, 2.5 mm id injector, 2 Projections, HMI Compatible and for most routine sample analysis with Agilent 7500 ICP-MS. Standard quartz torch suitable for animal feed, chemicals and fertilizers, clinical and forensic materials, drinking, ground and surface water, food and drink, geological without HF, metals, plants, soil and sediment without HF, wastewater and sludge, brines and salts, isotopic analysis of minerals, but not inert to samples containing hydrofluoric acid (HF).Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Glass Expansion IsoMist XR Kit for Agilent 4100/4200 MP-AES
IsoMist XR Kit for Agilent 4100/4200 MP-AES. Compatible with Agilent 4100/4200 MP-AES. This IsoMist XR is programmable and temperature-controlled, with a glass cyclonic spray chamber now featuring an improved thermodynamic design that provides an extended temperature range of -25°C to +80°C. The temperature is settable in 1°C increments and can maintain accuracy of + or – 0.1°C. Proven performance results are, improved long-term stability and precision, no dilution for volatile organic solvents, reduced oxide interferences (ICP-MS), enhanced sensitivity and accuracy, lower detection limits, faster washout, and reduced hazardous waste/disposal fees.Replacement parts include 21-809-3185, GAZ-04-90, and 501907304.The IsoMist XR comes standard with a borosilicate glass spray chamber. Optional quartz or PFA HF-resistant spray chambers can be ordered separately.Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001